1. Fritz Router

. Call up in your web browser. Switch to the folder 'fritzbox-7360-v1' or 'fritzbox-7360-v2', then to the subfolder 'other', and then to the folder 'recover'.Important:You can find the version number in the user interface of the FRITZ!Box under 'System Update' on the 'FRITZ!OS File' tab.

If the tab is not displayed, enable the. The number for v1 begins with 111., and the number for v2 begins with 124. Download the recovery tool for your FRITZ!Box to the computer; it has the file extension '.exe'. ATTENTION!Only disable firewalls to run the recovery tool and re-enable them before connecting to the internet. Run the file 'fritz.box.recover-image.exe' and click 'Next'. Follow the instructions.Note:It is not an error if the program does not search for the FRITZ!Box under its IP address 192.168.178.1, but under a different IP address instead. This does not affect the process.

Fritz Router

If the tool displays an error message such as 'Recovery failed due to an error', run it again. If recovery fails after several attempts, run the recovery tool on a different computer. If the recovery tool displays the message 'Complete - FRITZ!Box successfully restored!' , recovery was successful.

Abort the recovery procedure. Close any active firewall applications. Press the keyboard shortcut Windows key + Pause key. The window with basic information about your computer opens.

Click 'Device Manager'. Under 'Network adapters', double-click the LAN network adapter that is connected to the FRITZ!Box. Select the tab for the advanced settings (for example 'Advanced' or 'Advanced Settings').

Select the property for setting the transmission rate (for example 'Transmission Rate', 'Connection Type', 'Media Type'). Select the value '10 Mbit/s, half-duplex' or similar and click 'OK'. Run the recovery tool again.

IP configuration of the NIC assigned to the VM9. Update IP via CRONI wrote a little script which can be run via CRON periodically to update the IP in case it changes. See the 'Files' table at the end of this article10. Update IP via Azure AutomationIn the files table below, you can find a Python Runbook which you can use in an Azure Automation account to regularly check and update the Local network gateway.11. Automated setup via 'az' (Azure CLI)For the lazy ones, I created a script to setup everything.The only manual step is adding the required information in the script and import the generated VPN config file to your FRITZ!Box.Azure CLI must be installed!12.  Dxf file polyline example. Files.